1. INSERT YOUR LIGHTBULB

Before turning on your lamp, make sure your lightbulb is properly inserted into the socket.

Unscrew and re-screw the bulb if needed, making sure it is securely seated in the socket. Sometimes the bulb can sit at a slightly incorrect angle, preventing the lamp from making the proper connection.

TIP: Don't overtighten the bulb—securely screwed in is all you need.

2. FLIP THE BLACK SWITCH ON

Locate the black power switch on your Peanut Lamp's cord and make sure it is flipped to the “ON” position.

This switch controls power to the touch sensor.

Important: If the black switch is OFF, the touch sensor will not work—even if you tap the sensor on the lamp base.

3. TAP THE SILVER TOUCH SENSOR

Once the black switch is ON, locate the silver touch sensor/knob on the lamp base.

Simply tap the silver knob to turn the light on.

Tap it again to turn the lamp off.

4. IF YOUR LAMP ISN'T TURNING ON

Don't panic! There are a few quick things to check before reaching out to us.

First, check the black switch.

Make sure it's firmly in the ON position. The touch sensor won't function if the switch is off.

Next, check the lightbulb.

Remove the bulb and carefully screw it back in, making sure it is properly aligned and securely seated.

Finally, try the touch sensor again.

With the black switch ON and the bulb securely inserted, tap the silver sensor on the lamp base.

5. STILL NOT WORKING? LET US KNOW!

If you've tried the steps above and your Peanut Lamp still isn't lighting up, we're happy to help troubleshoot!

When contacting DUPE, please include a short video showing:

1. The black switch being flipped to ON
2. The silver touch sensor being tapped ON and OFF
3. An overview of where and how the lightbulb is inserted

This helps our team quickly determine whether there's a setup issue or whether your lamp may need further assistance. Email this video and inquiry to hello@geturdupe.com.